The overall thickness of the overall wardrobe back panel analysis of the wardrobe can not tell the secret

[ Chinese wardrobe net ] For the needs of different consumers, the installation of the whole wardrobe of the plates and accessories is a matter of learning, and as the backboard supporting the overall wardrobe is not exposed to people's eyes, but the thickness of the overall wardrobe backboard Better? Today, the overall wardrobe backboard thickness of China's wardrobe network is analyzed in all aspects. Let's take a look at the secrets of the wardrobe.

Overall wardrobe backboard introduction

Which piece of the back panel of the whole wardrobe is? In general, the whole wardrobe is installed in the living room, and is standing against the wall. The largest contact area between the wardrobe and the wall is the back panel of the whole wardrobe. The whole wardrobe is made up of different panels, and the back panel is a single board directly nailed to the two side panels.

Overall wardrobe layout

Overall wardrobe back panel thickness - 5MM

Gap: Use a 5mm overall wardrobe back panel to leave a lot of space, which is why many consumers or businesses choose 5mm backplane. However, the thickness of the 5mm backing plate is always too thin. Whether it is the slotting of the back panel of the wardrobe or the stability of the overall product, the 5mm backboard cannot fully exert the performance of the wardrobe.

Moisture-proof: The 5mm-thick wardrobe backboard can basically meet the moisture-proof performance. Although the moisture will not be directly immersed, if it encounters a serious rainy season, it will cause certain damage to the moisture resistance of the board. Many consumers will choose a 9mm wardrobe back panel.

Stable: 5mm wardrobe back panel stability, if it is a large wardrobe, the length is between 1000mm-2000mm, for the stability, the backboard is less stressed and less likely to be deformed. If the length of the wardrobe is greater than 2000mm, the corresponding force of the backboard is too large, and the 5mm backboard is more easily deformed, and the backing is more likely to break.

Overall wardrobe back panel thickness - 9MM

Gap: 9mm back plate is the common thickness size of custom closet, because in the gap processing, the thickness of 9mm back plate is more suitable for slotting, and the gap with the wall plays a very good role, and the wardrobe space occupied by the backboard It will not be very large, which will help to leave a gap between the backboard and the wall to make the moisture resistance better.

Moisture-proof: 9mm thick overall wardrobe back panel, can make moisture-proof work in the space of the saved space, make the backboard more secure, and also properly reserve the gap, and the appropriate moisture-proof cotton can be added in the middle. The wardrobe back panel is more resistant to moisture.

Stable: The bearing capacity of the 9mm-thick wardrobe backboard is sufficient to support the gravity of the top cabinet and each laminate. Not only can the wardrobe be stabilized, but also more space can be reserved, so that the wardrobe will not protrude and will not cause the wardrobe. The use area is smaller, and the like, and it is more suitable for the overall wardrobe with a larger width, and the effect is further exerted, so that the entire wardrobe becomes extremely strong.

Upholstered Chair

Upholstery is the materials-which include fabric, padding, webbing, and springs-that make up the soft coverings of chairs, sofas, and other furniture.

The process began in the Middle Ages and grew in popularity during the 17th, 18th, and 19th centuries. Over the years, a wide variety of materials have been used, from hay to horsehair to wool.

Modern upholstered items use metal springs and foam for greater durability. While the interior materials may not be visible, they make a big difference in whether the piece is comfortable . And though fabric can always be changed-and may need to be, depending on wear and tear-choosing high-quality inner layers will help make sure the piece will last for years to come.So before chosing upholsterd chairs whether they are Office Chair,Multifunctional Round Stool or Fabric Seat,you have to focus on the durability of the coated matieral.

Upholstered Chair,Office Chair,Multifunctional Round Stool,Fabric Seat

STARWAY INTERNATIONAL HOME-LIVING CO., LTD , https://www.starwayfurniture.com

Posted on