[ Chinese wardrobe net ] The installation of plates and accessories for the whole wardrobe is a matter of learning. However, as the backboard supporting the whole wardrobe is not exposed to people's eyes, but the thickness of the sliding door backboard is better? The thickness of the wardrobe net backboard is introduced to solve this problem perfectly.
Which is the back panel of the sliding door wardrobe? Under normal circumstances, the sliding door wardrobe is installed in the living room, and is standing against the wall. The largest contact area between the wardrobe and the wall is the back panel of the sliding door wardrobe. The sliding door wardrobes are all made up of different panels, and the back panel is a single board directly nailed to the two side panels.
What are the functions of the sliding door backboard? Every year, there is a “back to the south†in the south. The air is damp. If the indoor wardrobe does not have a backboard, the clothes and bedding stored in the closet are prone to moisture and mildew, causing the clothes to smell and even Damaged clothing. The back door of the sliding door wardrobe has no effect on the wardrobe. The back board is generally not load-bearing, and is mainly dustproof, moisture-proof and stable. The thickness of the sliding door backboard is commonly used in the thickness of 5MM, 9MM, and 18MM. The thickness of the sliding door wardrobe is better from the backlash, moisture, and stability.
1, 5MM thickness
Gap: Use 5mm sliding door wardrobe back panel clearance to leave a lot of space, which is why many consumers or businesses choose 5mm backplane. However, the thickness of the 5mm backing plate is always too thin. Whether it is the slotting of the back panel of the wardrobe or the stability of the sliding door of the product, the 5mm backboard cannot fully exert the performance of the wardrobe.
Moisture-proof: The 5mm-thick wardrobe backboard can basically meet the moisture-proof performance. Although the moisture will not be directly immersed, if it encounters a serious rainy season, it will cause certain damage to the moisture resistance of the board. Many consumers will choose a 9mm wardrobe back panel.
Stable: 5mm wardrobe back panel stability, if it is a large wardrobe, the length is between 1000mm-2000mm, for the stability, the backboard is less stressed and less likely to be deformed. If the length of the wardrobe is greater than 2000mm, the corresponding force of the backboard is too large, and the 5mm backboard is more easily deformed, and the backing is more likely to break.
(This article is the exclusive original manuscript or exclusive disclosure information of Zhonghua Wardrobe. All rights reserved. If you want to reprint or otherwise copy and publish, please indicate the source of China Wardrobe net and website. If you need to modify or partially quote, please contact Zhonghua Wardrobe Network Operation Center. .)
Round Coffee Table,Glass Coffee Table,Marble Coffee Table,Coffee Table With Storage
Anji TianWei Steel and Plastic Products Co.,Ltd , https://www.twchair.com