[Chinese wardrobe net] Now there are many types and brands of wardrobes . Many consumers don't want to buy too expensive wardrobes. So what kind of wardrobes are available? Let's take a look at the assembled wardrobes.
The specific steps of how to assemble the wardrobe
1. Check the packaging: First of all, when receiving the goods, whether it is express or direct purchase, be sure to check whether the packaging is seriously damaged, if there is, it is likely that the steel pipe inside is also crushed, such goods can not be signed and Buy it. Be sure to check it out.
2. Check the accessories: open the package, and then check whether the accessories inside are complete, there is a manual, check on the manual, if it is less, it is estimated that it can not be installed without loading, so the number is clear in advance, so as not to be wasted. Be sure to wear gloves and be sure to read the instructions carefully.
3. First install the bottom: first install the bottom is a piece, take out the four-way joint with the bottom and the high, connect the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, and decide the position of the place. Install a short tube on one side and then install a short tube on both sides. Then install a three-way joint on each side.
4. Wardrobe cover: After installing the bottom, insert six short steel pipes, then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of the same partition as the bottom, then put it on the six steel pipes. .
5. Short-side floor: If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, and then install two horizontal steel pipes. Then install the cloth, then make up the four-way joint on both sides. Repeat the partition until it is attached to the top.
6. Long-side steel pipe: After the short-side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long pipes to the top.
7. Install the top steel pipe: After both sides are installed, connect them directly with long steel pipes, so that the wardrobe will be installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side backwards so as not to be installed. The steel pipe can also be installed with a hook-type joint, which is relatively simple.
8. Set of wardrobe cloth cover: When the top of the large set is at the top, it is best to pull the bottom to the top, so that there is space for pulling on the top, until the upper corner is installed diagonally. At this time, the cloth cover can be pulled down. Just put it in. After loading it, I feel that the whole wardrobe is so big. It is more than a small series, and it takes an hour to install it. As long as it is careful, it will not be wrong.
The above is all the information about the assembled wardrobe.
[Extended reading]
Customized wardrobe price how to count examples you can definitely understand
How to calculate the overall wardrobe price? What is the price?
What is the price of custom-made wardrobes?
Airbrush Spray Pen,Spray Art Airbrush Pen Set,Crayola Spray Pens,Airbrush Painting for Beginners,Electric Airbrush Gun
Guangdong Jishengke Industrial Co.,Ltd , https://www.dgjskpad.com