The ticket printer is a kind of printer divided according to the main purpose of the printer, just like a photo printer or a label printer, instead of the dot matrix printer, ink jet printer, and laser printer that we usually refer to according to the principle of printing. Thermal printers.
What Mistakes Should I Avoid Using Bill Printers?
The use of a bad environment: Some machines use a large amount of dust, coupled with long-term use of the machine is not maintained, the machine is full of dust and debris, plug the optical channel of the photoelectric sensor, causing the printer to misuse, can not work properly. It is recommended that users always pay attention to maintenance during use to ensure that you use the printer better.
Do not use the ribbon protection sheet: Some users remove the small plastic sheet in front of the ribbon cartridge when replacing the ribbon core, and do not attach it after replacing the ribbon cartridge so that the printed document will be used when used. There is no clear arc, which affects the print quality. At the same time, it affects the drive of the ribbon. It is easy to break through the ribbon and scrape off the print pin. Therefore, the user must not forget to attach the ribbon protector after changing the ribbon core. Can't be wrong).
The position of the paper thickness adjustment lever is incorrect: The paper thickness adjustment lever should be adjusted according to the thickness of the printing paper, not too large or too small, the gap is too large to break through the ribbon, and the gap is too small to cause damage to the print head. At present, some newly-launched paper printer paper thickness adjustments are done automatically and are more convenient to use.
Hot plugging and plugging: The so-called hot plugging refers to the communication cable between the host computer and the printer when the host and printer power are turned on at the same time. When the host computer and the printer are turned on at the same time, there is a potential difference because the voltage of the host output port and the voltage of the printer interface terminal are not equal. At this time, the connection cable is disconnected and the interface terminal is short-circuited, causing the printer interface and the host output port to be burned out. , In severe cases, the motherboard of the printer may be damaged, causing unnecessary losses. Therefore, users must pay attention to avoid hot plug.
What Mistakes Should I Avoid Using Bill Printers?
The use of a bad environment: Some machines use a large amount of dust, coupled with long-term use of the machine is not maintained, the machine is full of dust and debris, plug the optical channel of the photoelectric sensor, causing the printer to misuse, can not work properly. It is recommended that users always pay attention to maintenance during use to ensure that you use the printer better.
Do not use the ribbon protection sheet: Some users remove the small plastic sheet in front of the ribbon cartridge when replacing the ribbon core, and do not attach it after replacing the ribbon cartridge so that the printed document will be used when used. There is no clear arc, which affects the print quality. At the same time, it affects the drive of the ribbon. It is easy to break through the ribbon and scrape off the print pin. Therefore, the user must not forget to attach the ribbon protector after changing the ribbon core. Can't be wrong).
The position of the paper thickness adjustment lever is incorrect: The paper thickness adjustment lever should be adjusted according to the thickness of the printing paper, not too large or too small, the gap is too large to break through the ribbon, and the gap is too small to cause damage to the print head. At present, some newly-launched paper printer paper thickness adjustments are done automatically and are more convenient to use.
Hot plugging and plugging: The so-called hot plugging refers to the communication cable between the host computer and the printer when the host and printer power are turned on at the same time. When the host computer and the printer are turned on at the same time, there is a potential difference because the voltage of the host output port and the voltage of the printer interface terminal are not equal. At this time, the connection cable is disconnected and the interface terminal is short-circuited, causing the printer interface and the host output port to be burned out. , In severe cases, the motherboard of the printer may be damaged, causing unnecessary losses. Therefore, users must pay attention to avoid hot plug.
The living room is the first space guests see when they enter your home, and it's the area where they spend most of time. Therefore, our living room should be designed as an ideal place for entertainment and relaxation, which is comfortable, bright and beautiful. A suitable combination of different living room furniture can embellish your living room and make the whole space full of vitality.
Living Room Furniture,modern living room furniture,luxury living room furniture,minimalist living room furniture
Foshan Poesy Furniture Co., LTD. , https://www.poesy-furniture.com