[ Chinese wardrobe net ] When you choose a wardrobe with formaldehyde emission exceeding the standard, you can install a time bomb at home. Because the clothes in the closet are eroded by formaldehyde every day, it will be very bad for your health. How can I choose a whole wardrobe with a small amount of formaldehyde emission, health and environmental protection, and not put a "nuclear power plant" that radiates formaldehyde at home? Let Xiaobian give you a clear road.
1, look at the material used in the wardrobe
At present, the plates used for the production of the whole wardrobe are mainly solid wood particle board (chip board) and medium-density board (medium density board). Good quality solid wood particle board and MDF board, formaldehyde emission is relatively small, the board is strong, heavy, withstand, strong pressure resistance. Because the solid wood particle board is used in the production of less glue, it is relatively environmentally friendly than the MDF.
2, look at the environmental level of the board used
When we set the wardrobe, we often hear "E0/E1". According to the amount of formaldehyde released, E1 ≤ 1.5 mg / L, E0 ≤ 0.5 mg / L. As long as the E1 sheet is just beginning to pay attention to ventilation, it will have no effect on us. E0 grade boards are currently the healthiest on the market because of the low amount of formaldehyde released. E0 grade plate has passed the most stringent environmental protection test and is rated as one of the most healthy and environmentally friendly plates in the world. Because its environmental indicators are the same as fresh wood, formaldehyde is even lower than apples, so it is called “safety plate like fruitâ€. (The point to be reminded here is that it is not that there is no formaldehyde release from E0 grade plates, but it is rare and can be ignored.)
3, look at the veneer of the board for the wardrobe
When it comes to melamine, I believe many people think of Sanlu milk powder that has already been wiped out. However, in the sheet, it is common to apply a melamine surface to the surface because it is environmentally friendly, abrasion resistant and scratch resistant. Here, the melamine panel will not be harmful. Because the melamine panel is formed by impregnating melamine glue on the panel paper, it is cured by high temperature and high pressure, and there is basically no volatile harmful component after curing.
4, look at the edge of the whole wardrobe cabinet
The edge of the custom closet is very important: on the one hand, if the closet of the wardrobe is firm, fine and beautiful, the wardrobe will be beautiful and the service life of the wardrobe will be extended. Second, for the sheet that will volatilize formaldehyde, the edge seal can prevent formaldehyde from escaping. The sealing of small enterprises and small workshops is generally rough, not strict, and even glue leaks out.
5, look at the wardrobe brand
Choose the famous brand of the whole wardrobe, such as China's top ten wardrobe brands. The products of these manufacturers are all inspected by the National Building Materials Testing Center, and relevant certificates are issued. Such products have less aldehyde release.
If the surface of the board is affixed with glazed paper and ornate paper, or solid wood veneer, it looks good, but it is not very environmentally friendly, because it also needs to paint a layer of paint on it. The paint must volatilize formaldehyde. If the quality of the paint used is a little worse, the formaldehyde will be amazing.
pipe wrap tape System describe
The XUNDA-T400 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
It is a three-ply cold applied tape with stabiliesed polyethylene backing and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine
The 3Ply tape shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with a wrapping machine
2 Structure
The specification of the tape consists of four layers,
Internal Adhesive layer:Butyl rubber
External Adhesive layer: Butyl rubber
Film backing:Special blend of stabilized polyethylene fines
Interleaf:Anti adhesive Film Treated with Silicone
3 Features:
Excellent bonding between adhesive and carrier film via co-extruded intermediate layer.
Mechanically highly resistant tape system.
Practically impermeable to water vapour and oxygen.
Resistant to soil bacterial and soil electrolyte.
Compatible with coating from PE,PP,FBE,PU,CTE and Bitumen and ext- .
A Total Coating System with:
High adhesion and shear resistance
Resistance to corrosion disbondment
High electrical resistance
High dielectric strength
High corrosion protection for steel substrates
4 Physical Properties
Thickness: 0.80 mm ( 30 mils)
width: 100 mm to 800 mm
Length: 10 m , 25 m , 30 m and so on
Heavy Duty Double Sided Tape, Strong Double Sided Tape, Removable Double Sided Tape, Wide Double Sided Tape
Jining Xunda Pipe Coating Materials Co.,Ltd , https://www.pipe-wrap.com