[ Chinese wardrobe network ] Many customers after purchasing a custom closet , do not understand the installation process, today China Wardrobe network to give you the whole process of tracking custom wardrobe installation, together to see the custom wardrobe installation order!
Customized wardrobe installation order one
Horizontal and vertical. All horizontal planes should be flat and all facades should be vertical.
Custom wardrobe installation order two
For panel furniture, all gaps, such as the gap between the door panels, the gap between the drawers, and the gap between the cabinet and the cabinet should be within 2 mm. Solid wood furniture is required to be slightly lower due to its characteristics of shrinkage and swelling, but the gap cannot exceed 4 mm.
Custom wardrobe installation order three
The damper drawer and the sliding door are smoothly pushed and pulled, and do not slide back and forth. Where should the door be pushed?
Custom closet installation order four
The presence of materials: more formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.
Custom wardrobe installation order five
Fixing screws: The nails are generally left in the design according to the design. The workers at the site use special tools to fix the screws.
Custom wardrobe installation order six
Cutting the side panel: Since the wardrobe is placed on the wall, the side panel should be sawn off at the position of the baseboard. After you have it, look it up and see if it fits.
Custom closet installation order seven
Place the bottom plate: The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
Custom closet installation order eight
Fixing frame: Install the side and back panels of the closet according to the grooves on the board to adjust the position between the boards.
Custom wardrobe installation order nine
Installation of the top plate: It is best to prepare a climbing stool on the site. The top plate should be lifted up and then fixed with rivets.
Custom wardrobe installation order ten
Mounting the shelf: Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.
Custom closet installation order XI
Fixed door rail: The door rail is installed on the top and bottom of the wardrobe. The alloy material of the door rail is better, light and firm.
Custom closet installation order twelve
Install the clothes rail: Fix the rivet in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Custom closet installation order thirteen
Install the door leaf: two sliding doors should be attached to the position of the guide rail. Fix the door leaf first and then fix the guide rail of the bottom side to avoid the phenomenon that the door leaf will fall off later.
Custom wardrobe installation order fourteen
Adjustment and improvement: After all the installations, make a "full inspection" on the wardrobe. If there is any deviation, adjust it in time.
Custom wardrobe installation order fifteen
Complete the acceptance: Finally, check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
You can draw on the face and sew according to the drawing lines.You can also send us the picture,and we can sew the face for you.
Sewing A Cloth Doll,Make Paper Dolls,Make Doll Dress,Make Barbie Pants
Nantong Einsame Familie Toy Technology Co.,Ltd , https://www.einsamefamilies.com