CTP plate processor is one of the important hardware conditions for printing production. From the use of CTP plate printing machine manufacturers in major printing companies, the maintenance and maintenance of CTP plate machine is not in place, resulting in more or less machines. Some glitch. In order to improve the functions of the processor, it is very necessary to understand the daily maintenance and usage precautions.
CTP plate machine daily maintenance method:
When the CTP machine is enabled, first turn on the air switch, turn on the air pump, turn on the CTP power, and turn off the power in the reverse order. It should be noted that it is strictly forbidden to open any door and cover of CTP during the process of switching on and off, which may easily lead to personal accidents. After the CTP is turned on, please warm up for half an hour before running, otherwise it will reduce the quality of the publication and damage the machine. Another point is that the roller, the cleaning roller, and the outer cover filter must be cleaned once a month, and the optical filter is cleaned once every 3 months.
CTP plate machine use precautions:
The maintenance of the plate processor is usually one month apart. Wipe all rubber rollers, tanks and the entire body of the fuselage with warm water and a soft cotton cloth. The drive shaft, the drive chain, and the drying gear shaft are refueled. Replace the development every two weeks while replacing the filter element. Perform antifreeze testing every six months.
Article source address: http://
Best Sanitary Napkins,Sanitary Napkins Online,Disposable Sanitary Napkins,Biodegradable Sanitary Napkins
Shandong Tianzige International Trade Co., Ltd , https://www.sdbabydiapers.com