Recently, Jiangsu Provincial Administration for Industry and Commerce this sampling inspection is based on GB27887-2011 "Conditional System for Motor Vehicle Children Crew", "Jiangsu Provincial Administration for Industry and Commerce Quality Supervision and Inspection Rules for Automobile Child Seats", and the sampling inspection items are dynamic tests, signs and manual inspections. .
The sampling scope covers Zhenjiang City, the park and Huai'an City. For the 8 brands including Britax, Good Kids, Naonii and Thanksgiving, a total of 17 groups were selected and 16 were qualified, with a pass rate of 94.1%. Then, according to national standards, what is the specific content of the collision performance, logo and instructions for the child safety seat?
First, the collision performance
According to the national mandatory implementation standard GB27887-2011 "Conditional System for Motor Vehicle Child Crew", the collision performance must meet the following contents:
a. In the frontal collision, the maximum displacement of the dummy's head in the X direction and the Z direction should be within the standard range.
b. In addition to newborns, the cumulative time of the chest composite acceleration exceeding 55g should not exceed 3ms, and the cumulative time of the vertical acceleration along the abdomen toward the head should not exceed 3ms.
c. There should be no sign of any part of the restraining device invading the dummy's abdominal clay
Second, the logo and manual inspection
According to the National Enforcement Standard GB27887-2011 "Constrained System for Motor Vehicle Children Crew",
The logo must contain:
a. Manufacturer's name or trademark
b. Plastic parts should indicate the year of manufacture
c. should indicate the method of use
d. The backward child restraint system should be clearly marked with a permanent Chinese and English label with a minimum size of 60mm x 120mm
Â
e. It should be marked as: “Important – do not use it until the child weighs more than ⋯⋯ (see instructions for use).
f. If an ISOFIX configuration is included, this mark should be included and the letters appropriate for the size category should be indicated.
g. For the upper fixed point, there should be a sign indicating one of the following figures
 　　 The instructions must contain:
a. The language of the manual contains Chinese
b. For the “General Purpose†child restraint system, the following labels should be clearly visible without opening the package at the time of sale.
c. “Restricted Classes†and “Semi-General Classesâ€, when sold, the following labels should be clearly visible without opening the package
Â
d. The weight group to which this system is designed and its applicable fixtures should be stated
e. For child restraint systems that can be either forward or backward, a clear warning should be given to inform the child restraint system that the child restraint system should be used before the child's weight reaches the set limit or other indicator reaches a set limit.
f. It should be stated that the restraint system should be replaced after a severe accident
g. Users should always be warned that products that are not certified and that are modified are dangerous and that there are no installation instructions from the manufacturer nearby.
h. It should be noted that children should not be placed in the child restraint system without being looked after.
i. Bags and items that are likely to cause injury during a collision should be properly placed
j. It should be noted that the child restraint system without the face sleeve cannot be used; the system cover cannot use materials other than those recommended by the manufacturer, and the cover material affects the overall performance of the child restraint system.
k. There should be a clear warning that no other points of force other than those indicated may be used. The warning should also be indicated on the child restraint system.
l. For ISOFIX type child restraint systems, the user should read the instructions in the car manufacturer's manual for ISOFIX fixed points in the instructions of the restraint system.
Consumption reminder
When consumers purchase products, they can conduct self-examination of the logo on the one hand, and refer to the above criteria on the other hand. When the rights are infringed, they use the law to protect their legitimate rights and interests. In this way, the safety seat used to protect children's safety can really play its role.
In addition, product manufacturers and distributors should always remember to focus on product quality, not to produce or sell quality unqualified products solely for their own benefit.
Pet Electronics Toys,Cat Electronics Toys,Electronics Toys
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetstoys.com