Technical characteristics
1. Measuring range: liquid level: <2m, material level: <1m.
2. Measurement accuracy: 1.5%
3. Response time: 1 second to 30 seconds (factory setting 1 second).
4. Alarm output: relay contact switch output (normally open + normally closed), contact capacity 220VAC / 2A or 24VDC / 2A.
5. Working state: continuous work.
6. Operating environment: radioactive source and detector: -20 ～ 50 ℃; display: 0 ～ 50 ℃.
7. Power supply: ~ 220V (± 10%), 50Hz or intended use ~ 110V (± 10%), 50Hz. The power is less than 15VA.
8. Radioactive source: Cesium-137 (Cs-137), with a half-life of 30 years, and a source strength of 1 to 2000mCi depending on the user's conditions of use.
9. Weight: radioactive source part: 23 ～ 50kg; detector part: no more than 5kg; display part: no more than 1kg.
product description
γ-ray level gauge is a nuclear measurement and control instrument. It is made by applying the principle that γ rays are subject to different degrees of intensity attenuation when they penetrate various substances, and can be installed outside the container of various shapes being measured, such as balls, tanks, silos, chutes, pipes, etc It is used to detect the position of the liquid, slurry or solid material stored in the container, which is a non-contact and non-intrusive measurement method. The level gauge is not affected by changes in parameters such as pressure, temperature, density, viscosity, etc. of the tested material, and can operate safely and reliably for a long time in various harsh measurement environments. The instrument uses the relay output switch signal to control or alarm.
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycybag.com