1. The instrument operator should be familiar with the working principle, performance characteristics, testing points and testing items of various instruments. 2. The instrument operator prints the production report and monitoring report regularly every day to reflect the production operation in the factory in time. 3. Regularly conduct on-site inspections of the instruments at each detection point, and make good records. If abnormal conditions are found, they shall be handled and reported in time. 4. When it is rainy weather to inspect the instrument on site, the operator should pay attention to prevent electric shock. 5. The primary sensors of various detection instruments should be cleaned and descaled as required. 6. The printing machine parts of the microcomputer system should be lubricated regularly. 7. If the test instrument fails, the transmitter and converter shall not be disassembled or unloaded at will. 8. Maintenance measures should be taken for maintenance and inspection of instruments. For various instruments that have not been used for a long time or have been soaked in water due to improper use, they should be dried before use. 9. Computer software not used for operation in the factory is strictly prohibited to run on computers on the network. During operation, it is strictly prohibited to exit the computer software or insert a floppy disk. 10. Regular maintenance of various components of the instrument, probes, converters, calculators, conduction TV and secondary instruments, etc. Keep all components intact, clean and free of corrosion, the dial scale is clear, the nameplate, marking and lead seal are intact; the central control room is tidy; the microcomputer system works normally: the instrument well is clean and free of water accumulation 11. Non-instrument operators shall not enter the central control room at will.
Electric Guitar Bag,Electric Guitar Case,Guitar Gig Bag,Electric Guitar Gig Bag,Guitar Bag Case
Dongguan Mingpin Traveling Appliance Company , https://www.mpluggage.com