Step 1-When the printing press is in a safe state of standby and the printing plate has been installed, put the leading end or collet end of the blanket into the winding rod or locking system rod to fix it.
Step 2-If necessary, insert the gasket at the leading end or chuck end of the blanket and fix it.
Step 3-Turn off the printing press.
Step 4-Press the inching switch of the printing press and slowly turn the cylinder to roll out the blanket and liner.
Step 5-Put the printer in a safe state of standby and put the end of the blanket into the winding rod or locking system rod.
There are two main parameters of Air Pump in aquarium: gas volume and power. in generally speaking, the two parameters are related, with high power and large gas volume. The larger the air volume, the deeper the water depth can be used in the aquarium Fish Tank. The shallow water and the air pump with large air volume will splash water. The air pump with small air volume can be used in the fish tank with deep water depth, and the bubbles will be relatively small or even not give out air. Similarly, the larger the gas volume, the louder the vibration sound, and the smaller the gas volume, the quieter it is. The suggestion of air selection pump is to give priority to air pumps with adjustable air volume. Generally speaking, the air volume of these air pumps will be more than 1.5l/min, but it can be adjusted by manual knob.
Air Pump For Aquarium,Air Pump For Fish Tank,Fish Tank Air Pump,Aquarium Air Pump
Shenzhen GAKO Aquatics Products Co., Ltd , https://www.gako-aquarium.com