Careful attention when using inkjet printers

The high price of ink-jet printers makes people feel sad that silver is not enough, and when the number of printers is used more often than not, the original ink cartridges can be easily changed to afford a saddle. This article is mainly for everyone to use several ink jet printers to save ink.

Regardless of whether they are still compatible with compatible ink, there are several proposals that must be remembered:

1. Ensure that the ink cartridge being replenished is intact;

2. It is necessary to use high quality original ink for filling;

3. Before refilling the ink, the initial ink cartridges should be thoroughly cleaned and cleaned. Otherwise, two different inks will mix and cause chemical reactions, causing plugging and other problems. Do not clean the cartridge with the printer's own procedures. This operation is not only time-consuming, but also clean and tidy. The precise method of operation is: Before adding ink, use a syringe to fill the cartridge with pure water, try not to let the water overflow, and then capture the entire cartridge by hand, and make the ink refilling upward, gently swing a few times, In order to fully dissolve the remaining ink in the added clean water.

If using too much force during the swing may cause the liquid inside to overflow, then wipe it dry with a tissue or cloth as soon as possible so as not to infiltrate the profile into the circuit board and cause a hardware failure. Continue to use the syringe to insert the cartridge. The liquid mixture is drawn clean and tidy, and the operation is repeated several times until the color of the extracted liquid is very light, and the procedure of cleaning the ink cartridge provided by the printer is used for cleaning.

4. When filling ink cartridges with ink, the quantity must be appropriate;

5. Try to pick ink ink for filling;

6. After filling the cartridge with ink, it is best to let the cartridge stand for a few minutes first so that the ink slowly penetrates into all corners of the sponge pad, thus ensuring the final print quality;

7. To prevent the ink cartridges from being exposed to the air for a long period of time to cause dry and congested phenomenon. Despite the method of cleaning it, ink should be filled immediately after the cartridge is about to be inked, and the ink is printed immediately after ink filling. If the printer is not used within a short period of time, the shower head can be placed in a special shower head storage box. The rubber mat specially made there can block the air and maintain the permanent moistening of the nozzle.

8. If the cartridge is integrated with the print head, then when adding ink to the cartridge, care must be taken to ensure that the nozzles on the cartridge are not physically damaged. Otherwise, will the nozzle be congested? Damaged cartridges cannot be reused. In addition, as the cartridge is used in a large number of applications, the shower head may be contaminated by the splattered paper fibers, which may cause the output of the shower head to become less effective. Because of this, it is indispensable to periodically perform the cleaning of the shower head. When cleaning the shower head, you should try to gently clean the edges of the nozzle with a wet paper towel and a tissue-free towel instead of touching the nozzle. Continue to use the ink jet printer to clean the shower head on the panel to perform the cleaning action until the shower head is clean. The print output clearly ends.