Since the advent of direct plate-making equipment at the beginning of this century, the market has been in a stage of steady growth, and it will continue to grow steadily over a longer period of time. During the period from 2000 to 2004, the development of equipment was in the gestation period, the technology gradually matured, and the market holding amount also accumulated a certain amount. Since 2004, the development of the entire equipment market has shown an orderly and good growth momentum. It has begun to develop rapidly and steadily in the next few years, with an annual growth rate of about 40%. It is expected that this will continue to be maintained until at least 2016. Growth rate.
From the beginning of the development of direct plate-making equipment to 2012, the number of direct plate-making machines in the country can reach 5,000 units. As of 2014, it is expected to reach 10,000 units, and at least as of 2016, there will be further growth.
In order to further discuss the development status of direct plate-making equipment, the following will be explained from the perspective of CTP plate consumption. The data shows that after 4 years of gestation, the consumption of plates has gradually increased since 2004. As of 2010, the consumption of CTP plates in China has reached 69.45 million square meters. It is expected that by 2015, with the increase in the consumption of sheet metal, its consumption will surge to 401.3 million square meters, which is about 5.78 times that of 2010, and the annual growth rate will basically maintain a growth rate of 40%.
Although the observation points of the two are different, the results obtained are consistent: digital printing and printing digitization have entered a stable development period, and will continue to maintain the current growth rate in the next two years.
Leather Chair,Leather Lounge Chair,Leather Desk Chair,Brown Office Chair
Feat Top International(China) CO.,LTD , https://www.feattop.com