There are many problems with the printer's cleaning nozzle, and it is also one of the main factors causing plugging. The printer cleaning nozzle plays a decisive role in the protection of the printer nozzle. After the nozzle trolley is returned to position, the nozzle should be weakly pumped by the cleaning pump nozzle to seal and protect the nozzle.
When the printer installs a new ink cartridge or the nozzle is broken, the suction pump at the lower end of the machine will pump the air through the nozzle. The higher the precision of the nozzle, the better. However, in actual use, its performance and airtightness may be reduced due to prolonged time, increase of residual solids in the mouth of dust and ink. If the user does not check or clean it often, it will cause your printer head to malfunction.
To maintain this part, remove the upper cover of the printer, remove the trolley, and inhale the pure water with a needle to rinse it. In particular, clean the micro-hole gaskets in the mouth. Here, we must remind users that when cleaning this part, do not use ethanol or methanol to clean it. This will cause dislocation and deformation of the microporous gasket embedded in this component.
In addition, it is necessary to mention the inkjet printer. It is necessary to keep away from the high temperature and dust working environment as much as possible. Only a good working environment can guarantee the long-term normal use of the machine.
When the printer installs a new ink cartridge or the nozzle is broken, the suction pump at the lower end of the machine will pump the air through the nozzle. The higher the precision of the nozzle, the better. However, in actual use, its performance and airtightness may be reduced due to prolonged time, increase of residual solids in the mouth of dust and ink. If the user does not check or clean it often, it will cause your printer head to malfunction.
To maintain this part, remove the upper cover of the printer, remove the trolley, and inhale the pure water with a needle to rinse it. In particular, clean the micro-hole gaskets in the mouth. Here, we must remind users that when cleaning this part, do not use ethanol or methanol to clean it. This will cause dislocation and deformation of the microporous gasket embedded in this component.
In addition, it is necessary to mention the inkjet printer. It is necessary to keep away from the high temperature and dust working environment as much as possible. Only a good working environment can guarantee the long-term normal use of the machine.
Pet Crystal Screen,Pet Crystal Alr Screen,Ust Alr Pet Crystal Screen,Laser Projection Screen
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxingboard.com