The ultraviolet test chamber can reproduce the damage caused by sunlight, rain and dew. The equipment conducts the test by exposing the material to be tested in a controlled alternating cycle of sunlight and moisture while increasing the temperature. The equipment uses ultraviolet fluorescent lamps to simulate sunlight, and can also simulate the effect of moisture through condensation or spraying. In order to facilitate heat dissipation and maintenance of the cabinet, Yashilin recommends that you install according to the following conditions:
1. After the installation, sufficient maintenance space should be reserved between the equipment and the adjacent wall or other equipment;
2. It should be installed in a place away from combustibles, explosives and high-temperature heat sources;
3. It should be installed in a place with little dust;
4. It should be installed in a place without direct sunlight;
5. It should be installed in a well-ventilated place;
6. Avoid sudden changes in the ambient temperature of the installation site of the ultraviolet test chamber;
7. It should be installed on a level ground (a level should be used to determine the level on the ground during installation);
8. In order to exert the function and performance of the test equipment stably, the place where the annual temperature is 15 ℃ ～ 28 ℃ and the relative humidity is not more than 85% should be selected;
9. Install as close to the power supply as possible. The user is required to configure the device with an air or power switch of corresponding capacity at the installation site, and this switch must be used independently for this device (recommended power switch capacity: 32A)
Other precautions: opening the door of the test box during the test will cause temperature and humidity fluctuations in the box; if the door is opened multiple times or the door is opened for a long time or the test sample emits moisture during the test, the refrigeration system may be replaced The heater freezes and does not work properly.
Simulate the environment for quality and create value for users.
Inkjet Machine Accessories
Use and replace the accessories of major brands of printer, perfect replacement, quality assurance
All products are compatible/alternative spare parts
All of the products display in our website are only used for samples display.It doesn't mean we have obtained the authorization&have the right to marketing the products of following brand: Domino®, Markem-Imaje®,Linx®,Willett,Videojet®,Citronix®.
Our products are all compatible with non-original(Not genuine),all of the products are not in any way associated with the above mentioned brand.
If the price is different, subject to salesman's quoted.
About the freight, it is better to consult customer service first.
Inkjet Filters,Inkjet Printer Inkjet Filters,Inkjet Capsule Filter,Uv Ink Filter
GUANGZHOU INCODE MARKING TECHNOLOGY CO., LTD. , https://www.gzincode.com