First, the font problem
â‘ Some font library description methods are different, and the overlapped parts of the strokes will appear through the output, be careful!
②Paragraphs containing Chinese and English special characters are prone to problems, such as "■, @, ★, ○", etc.
â‘¢Use the new standard GBK font library to solve the problem of missing remote characters.
â‘£ Fonts with too fine strokes, it is best not to use more than 3 colors of aliasing, such as (C10 M30
Y80) Waiting for the same reason, it does not apply to the reverse of white on dark background. In the unavoidable situation, it is necessary to tick the reversed white words, and the approximate background color or a printed monochrome (usually black K) is applicable.
Second, the problem of gradual change
①The common problem is this: if the gradient of magenta → black, the setting is wrong: (M100 → K100) it will be ugly in the middle!
The correct setting should be like this: (M100 → M100 K100) After careful analysis, you will understand, other situations can be deduced by analogy.
â‘¡Transparent gradient is a method suitable for network graphics. The output is not possible because the spatial mixing mode is RGB, and the screen mixing color is too different from the printed CMYK. The effect mixing mode in the X3 version is already CMYK, using 9 to 12 Attention to the version.
â‘¢ The gradient of the black part should not be too low, such as 5% black, because there is a black overprint option when outputting, the replacement of black below 10% is usually used instead of overprinting, which causes problems. Similarly, using pure light black Be careful.
Third, the picture problem
â‘ One thing to note about the psd file is that you should not do any "destructive operations" after importing it, such as: rotation, mirroring, tilting, etc. Due to its transparent mask, a broken image will be generated after output.
â‘¡It's still a mask. Be careful when using coreldraw. If necessary, it is better to take the "precisely cut frame" method to be more secure.
â‘¢ Color mode, don't blame me for being wordy, this is something that even the veteran has done wrong. All pictures must be cmyk or grayscale and monochrome bitmap, otherwise they cannot be output.
Four, output accessories
That is, the accessories such as corner lines, cross lines, color marks, etc. are output, and now the output company services are very good, don't worry.
5. Pre-press inspection
Enable printing, set the regular --- target --- PostScript file that has nothing to do with the device, and then set other project parameters, all print-out functions can be set as needed (even instant imposition, there are tutorials online). Please pay more attention to the warning bar.
In addition to being able to preview the printing results, you can also directly print out the PostScript file. This file contains all your settings. Although you can use coreldraw to open it again, most of the editing has been restricted. If you are confident in yourself, send the PostScript file directly!
Shoulder bag, crossbody bag, hand bag, mommy bag,Hiking bag,Thermal box
Dongguan Jinying Handbags Co.,Ltd , https://www.jinyingbag.com