Metallographic analysis software UV-ME
The system is equipped with high-definition professional camera and professional metallographic analysis software. Connect to a computer to analyze, identify and output GB / JB, YB for metallographic images.
The system is equipped with high-definition professional camera and professional metallographic analysis software. Connect to a computer to analyze and identify the metallographic structure image (such as the average grain size rating complies with GB6394-86, the ferrite grain size measurement rating mixed with pearlite complies with GB6394-86, the measurement of nonmetallic inclusions in steel Compliant with GB10561-89, the measurement of decarburized layer, carburized layer complies with GB224-8 and GB11354-89, spheroidizing grade of nodular cast iron and graphite size evaluation complies with GB9441-88, pearlite lamellar spacing measurement, gray cast iron graphite length measurement GB7216-87, medium carbon steel martensite needle length measurement, bulk carbonization measurement conforms to GB4462-84, various phase content measurement, etc.), statistics and graphic report output.
UV-ME metallographic analysis software integrates today's advanced image analysis technology with powerful functions and comprehensive technology. It is a perfect combination of metallurgical microscope and intelligent analysis technology. The measurement and evaluation results are fast and correct, which is in line with national GB and industry JB / YB standard. The system interface is fully Chinese, simple and clear, and easy to operate. After simple training or control instructions, you can operate freely. And provides a quick way to learn metallographic common sense and popularize operations.
One software basic function:
1. Can display ruler, pointing arrow, text on the image
2. You can perform various processing on the image: such as: image enhancement, image overlay, partial extraction, fixed magnification, contrast brightness and color adjustment, and dozens of functions.
3. Basic measurement with geometric parameters such as length, roundness, curve, perimeter, area, percentage content, etc.
4. It can be output in the form of data table, histogram output, and image printout.
Two software-specific functions:
1. Grain size measurement rating (grain boundary extraction, grain boundary reconstruction, single phase, dual phase, grain size measurement, rating)
2. Measurement and rating of non-metallic inclusions (including sulfides, oxides, silicates, etc.).
3. Measurement and rating of pearlite and ferrite content; nodular graphite graphite nodularity measurement rating.
4. Measurement of decarburized layer and carburized layer. Surface layer thickness measurement.
5. Ferrite, austenitic stainless steel phase-area measurement.
6. Analysis of high-silicon aluminum alloy primary silicon and eutectic silicon.
7. Analysis of titanium alloy materials. . . . Wait.
8. Metallographic map containing basic commonly used metal materials, suitable for most unit metallographic analysis and inspection requirements.
9. In view of the continuous increase of new materials and imported brand materials. For materials and evaluation standards that have not been entered in the software, they can be customized and entered.
Three operating guidelines:
1. Size calibration: The actual size observed by each objective lens on the microscope is calibrated by a standard ruler placed on the microscope, and the corresponding scale size is displayed on the computer display
2. Image processing: Improve the clarity of captured images through various optimization methods.
3. Area selection: You can select the required area or all areas for analysis.
4. Target analysis: measure the selected microscopic metallographic images, compare the atlases, or perform automatic rating by computer
5. Picture management: edit, save, output and print.
Actual legend:
1 Grain size automatic rating:
Original picture extraction grain boundary
Table report after measurement
2 Ductile iron automatic rating
Original image after processing
Form report:
3 Carburizing layer measurement
Form report:
4 Pearlite Rating
Rating after original image processing
Copier Toner For Ricoh,Newly Compatible Printer Cartridge,Ricoh Mpc2503 Toner,Cheap Ricoh Toner Cartridge
jiangmen jinheng office equipment Co. Ltd. , https://www.jmjhtonercartridge.com