Main issues when applying anti-slip mats

Non-slip foot pads, non-slip pads are made of silicone rubber, and silicone rubber/SI silicone main chains are made of silicon (-si-o-si). Has excellent heat resistance, cold resistance, ozone resistance, resistance to oxygen aging. Has good electrical insulation properties. Tensile strength is worse than ordinary rubber and it is not oil resistant. advantage:
1, after the preparation of formula tensile strength can reach 500PSI and resistance up to 88LBS.
2, good and good compression deformation.
3. It has good resistance to neutral solvents.
4, with excellent heat resistance.
5, with excellent cold resistance.
6, for the erosion of ozone and oxides with excellent resistance.

Disadvantages:
1. It is not recommended for use in most thicker solvents, oils, thick acids, and diluted sodium hydroxide. 1. Seals or rubber parts used in the household appliance industry, such as electric kettles, electric irons, and rubber parts in microfluidic furnaces.

2. Seals or rubber parts in the electronics industry, such as mobile phone keys, shock absorbing pads in DVDs, seals in cable lines, etc.
3. Seals in various types of articles that come in contact with the human body, such as kettles, drinking fountains, etc.
Fluoroelastomer/FPM The fluorine-containing rubber in the molecule has a well-known type depending on the fluorine content (ie, the monomer structure). The widely used fluorinated hexafluoride fluorine rubber was originally marketed by DuPont under the trade name "Viton". Higher temperature resistance than silicone rubber, excellent resistance to old chemicals, resistance to most oils and solvents (except ketones, esters), weather resistance and ozone resistance; cold resistance is poor, the general use temperature range is 25 °C-250 °C, special formula can withstand low temperature to -40 °C. advantage:
1, can resist heat to 250 °C.
2, for most of the oil and solvents have the ability to resist, especially all the acids, aliphatic smoke, aromatic hydrocarbons and animal and vegetable oils.

Disadvantages:
1. It is not recommended for ketones, low molecular weight esters, and nitrate-containing mixtures. 1, cars, motorcycles, diesel engines and fuel systems.

2, chemical plant seals.
Silicon Fluorine Rubber/FLS Silicone Fluorine Rubber is a silicone rubber fluorinated, its general performance has the advantages of fluoroelastomer and silicone rubber; its oil resistance, solvent resistance, fuel oil resistance and high and low temperature resistance are good, general use temperature It is 25°C-200°C. advantage:
1. Suitable for special applications, such as the requirement of resistance to oxygen-containing chemicals, aromatized hydrogen solvents, and chlorine-containing solvents.

Disadvantages:
1. It is not recommended to be exposed to brake oil, ketones and hydrazine solutions. 1, space parts.

Natural rubber/NR is made from rubber tree collection latex and is a polymer of isoprene. Temperature resistance: 20°C─100°C. advantage:
1, has a good wear resistance, high elasticity, tear strength and elongation.

Disadvantages:
1, easy to aging in the air oxygen, when heated to become viscous, easy to expand and dissolve in mineral oil or gasoline, resistant to niobium but not resistant to strong acid. 1. It is a raw material for producing adhesive tapes, rubber hoses, and rubber shoes, and is suitable for making shock-absorbing parts and products used in automobile brake oils, ethanol and other liquids with hydrogen radicals.
2, pads and pads.
Polyurethane rubber/PU polyurethane rubber has very good mechanical properties, high hardness, high elasticity, and high abrasion resistance compared with other rubbers; aging resistance, ozone resistance, and oil resistance are also quite good. The general use temperature is 45°C-90°C. advantage:
1, wear, high pressure.

Disadvantages:
1, not high temperature. 1, suitable for industrial high pressure, wear-resistant seals, such as hydraulic cylinder seals and rollers and shafts.

2, high pressure business charge system.
Styrene butadiene rubber/SBR copolymer with styrene and diethylene terephthalate, compared with natural rubber, quality uniformity, less foreign matter, but the mechanical strength is relatively weak, can be used together with natural rubber. Temperature resistance: 30°C-100°C. advantage:
1, low-cost non-oil-resistant material
2, good water resistance, hardness of 70 or less with good elasticity.
3, when the high hardness has a poor compression deformation.
4, can use most of the neutral chemicals and dry, nourishing organic ketones.
For more information about non-slip mats, non-slip mats, non-slip mats, please contact Dongguan Shiqiaotou Wantai Rubber Mats Factory to sell customer service, contact telephone number, contact person: Mr. Li.