The cabinet is the most important piece of furniture in the kitchen. It undertakes the main storage and operation functions. It is very important to choose a cabinet with full-featured and beautiful appearance. The production cycle of custom cabinets is generally 25-30 days (except for solid wood, solid wood cabinets are 45-60 days).
After the kitchen door and floor are installed, the installation can only be carried out before cleaning begins. Therefore, the owner should generally order the cabinet before the project starts, which will make the project connection smoother. After sorting out the storage and use functions that the cabinets have to satisfy, the owner will go to the cabinets. At the same time, the home improvement designer can contact the cabinet designer, the two sides discuss the needs of the owner, the style of the cabinet, and set the design of the cabinet.
In the kitchen design, the industry mainly communicates with the designer about the needs of the kitchen function. "For example, where the electrical appliance is to be placed, there is no electrical appliance to consider embedding in order to leave potential." Industry insiders reminded that the use of water dispensers, kitchen treasures, etc. at home should also be explained in advance, because the socket should be reserved and pre-set inside the cabinet. Leave space.
The kitchen should first satisfy the use function, so don't overdo it when designing the cabinet. As long as the kitchen space matches the style of the home improvement, the colors of the cabinets and tiles can be echoed. If the size of the kitchen is too small, you should consider only meeting the basic functions, otherwise the overall space will appear depressed and crowded.
Extended reading: 4 ways to calculate the price of the cabinet
So, how to judge the quality of the cabinet? Furniture fans teach you a few ways.
1. Watch the door panel: The door panel is the face of the cabinet, which is as important as the face of the person. Any errors in the production process can be expressed on the door panel! The door panels produced by professional manufacturers are horizontal and vertical, and the gap between the door and the door is even after installation. The small factory produces a combination of cabinets, door panels will have uneven door seams, and even different sizes of door panels!
2, cutting board: cutting board is also called cutting material, is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing data through computer. The computer controls the dimensional accuracy of the material selection, and can process several sheets at the same time. The performance of the equipment is stable, and the dimensional accuracy of the opened sheets is very high. It is micron, and there is no so-called collapse in the edge of the board.
3, look at the slide rails: Although it is a small detail, but it really affects the quality of the cabinet. The dimensional error of the hole position and the plate may cause the slide rail to be misaligned with the peripheral fixing hole position during the installation, and there is a mismatch in the fitting, so that the drawer pulls loosely or the left and right looseness occurs. Therefore, we should pay attention to the selection process, but also pay attention to whether the drawer gap is uniform.
4, look at the edge of the board: high-quality cabinets, the edge of the package is smooth and smooth, feel good, the seal line is straight, the joint is fine, there is no ugly black stitching seam. The straight edge banding machine used by the professional manufacturer's sound factory completes the construction process such as edge sealing, broken head, trimming, chamfering and polishing at one time. The glue is evenly applied, the pressure of the pressure sealing edge is stable, and the precision of the processing size can be adjusted to the most suitable. The part ensures the most accurate size. In general, the small factory uses a brush to glue, manually press the edge, use a paper knife to trim the edge, and use a manual polishing machine to polish. Due to uneven pressure, many places are not firmly bonded, and because the edge of the package is not firmly bonded. It also causes a certain amount of gas such as formaldehyde to volatilize into the indoor air.
5, see punching: the current panel furniture is assembled by 3 in 1 connector, which requires a lot of positioning holes on the board. The matching and precision requirements of the hole positions are very high, and they directly affect the structural firmness of the cabinet cabinet. Professional manufacturers use multiple rows of drills to complete the edge of a board and a number of holes on the board. Each of these holes is a positioning reference, and the size is guaranteed. The small manual factory uses row drills, even manual pistol drill holes, and the size error can be imagined.
Joker System,End Tuber Holder,Insert Plastic Chrome Tube,Swivel Pipe Connectors
JOKER UNO LIMITED , https://www.jokeruno.com