100 batches of wooden furniture were sampled and 79 batches were qualified, with a pass rate of 79%. This data became the lowest qualified rate in the product quality supervision and inspection in Shenyang in the second quarter. Among them, the unqualified formaldehyde emission and the unqualified woodworking requirements are the two main reasons for the unqualified sampling of wooden furniture.
Recently, Shenyang Quality Supervision and Technical Supervision Bureau released the "2016 Shenyang Product Quality Supervision and Inspection Report" and "Shenyang City Product Quality and Safety Risk Monitoring Circular" in the second quarter of 2016.
In the second quarter, a total of 19 types of 410 batches of products were sampled in four categories.
Huang Zhiyong, deputy director and spokesperson of Shenyang Quality Supervision Technical Supervision Bureau, introduced that in the second quarter of 2016, the Municipal Quality Supervision Bureau conducted supervision and spot checks on the quality of some products in the production field.
The supervision and spot check products released this time include 19 kinds of 410 batches of products, including daily consumer goods, industrial production materials, agricultural production materials and building decoration materials. The average pass rate is 92.7%.
Among them, check the 30 batches of sofa products, qualified 29 batches, the pass rate is 96.7%; check the spring soft mattress 20 batches of products, qualified 18 batches, the pass rate is 90%; check 100 pieces of wooden furniture, qualified 79 batches, the pass rate was 79%; 62 batches of clothing were inspected, 58 batches were qualified, the pass rate was 93.6%; 25 batches of plastic pipes were inspected, 23 batches were qualified, and the pass rate was 92%; 27 batches of exterior wall coating, the pass rate is 100%; 10 batches of metal furniture were checked, the pass rate was 100%; 18 batches of lubricating oil were sampled, the pass rate was 100%; 24 batches of ethanol gasoline were sampled and qualified. The rate is 100%; 6 batches of ordinary diesel oil are sampled, the pass rate is 100%; 6 batches of pesticides are checked, the pass rate is 100%; 2 batches of fire extinguishers are selected, the pass rate is 100%; 80 batches of shoes are checked, the pass rate It is 100%.
The minimum rate of wooden furniture is only 79%
Huang Zhiyong introduced that in 2016, Shenyang Quality Supervision Bureau strengthened the quality supervision and inspection of wooden furniture products in the production area of ​​the city, effectively preventing and controlling the quality and safety risks of wooden furniture products.
In 2016, 100 batches of wooden furniture products produced by 100 production enterprises in Shenyang were sampled, and 79 batches were qualified, with a pass rate of 79%. Unqualified items include: 11 batches of formaldehyde emission failure; 11 batches of woodworking requirements fail; 4 batches of surface physical and chemical properties fail; 8 failed batches of consumption instructions.
Wooden furniture is a product that is closely related to consumers. The failure of major key items of the product poses a safety hazard to human health.
The failure of woodworking requirements is also the main cause
The amount of formaldehyde released is an important test item related to personal health and safety. National mandatory standards stipulate that the amount of formaldehyde released should be ≤1.5mg/L.
In this supervision and spot check, 11 batches of formaldehyde emission items were unqualified, and the most serious formaldehyde emission reached 6.9mg/L. The main reason for the unqualified project is that the quality of the substrate or adhesive used by the manufacturer is inferior, resulting in excessive formaldehyde emission from the furniture. Formaldehyde is harmful to the human nervous system, immune system, liver, etc., and furniture with excessive formaldehyde has an impact on the health of consumers, and there are potential safety hazards.
Woodworking requirements are a quality requirement set according to the use of wood-based panels in products. It is an important inspection item in wood furniture products.
According to the relevant national standards, the non-intersection surface of the wood-based panel parts in the furniture shall be edge-sealed or finished. Edge-sealing or finishing of wood-based panels not only reduces the release of harmful gases in the panels, but also effectively isolates moisture from the air, preventing or delaying furniture deformation, cracking or mold.
In this supervision and spot check, 11 batches of products for woodworking required the project to be unqualified, that is, 11 batches of products were not sealed. The main reason for the unqualified project is that the company does not understand the standard and the process specification is unreasonable.
Product specification is the basis for consumers to protect their rights in the future
For the spot inspection, there are 4 batches of wooden furniture products whose surface physical and chemical properties are unqualified, mainly because the surface coating of wood furniture or soft and hard covering plays the role of protecting furniture from external erosion, and the products with surface physical and chemical properties are not up to standard. In daily use, it will cause surface paint film coating or soft and hard surface cracking, peeling, discoloration, etc., affecting the beauty and service life of wood furniture products.
In addition, when consumers purchase wooden furniture, the instructions for use of the furniture must meet the relevant requirements of the standard. The content should include at least 6 items: product name, model specification, implementation standard number; main product size and use occasion; main original and auxiliary material name; hazardous substance limit index (when relevant national standards are implemented); product use method, Precautions; product maintenance methods. In this spot check, 8 batches of wooden furniture products were unqualified. Huang Zhiyong reminded consumers that product specifications are the consumption vouchers for consumers to purchase goods, and they are the basis for future rights protection. Therefore, the purchase should be carefully checked to see if the instructions meet the standards.
Unqualified manufacturers will be dealt with according to laws and regulations
The wooden furniture manufacturers that fail in this sampling will be disposed of in accordance with the laws and regulations of the People's Republic of China Product Quality Law. The production enterprises are strictly required to take corrective measures in a timely manner to eliminate or reduce risks, improve product quality, and ensure product quality and safety. For more information on the furniture industry, please pay attention to the official website of Xianghe Furniture City http://
P-type Traction Rope,traction rope,rope tug toys for dogs
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproducts.com