[ Zhonghua Wardrobe ] The panels used in the furniture currently on the market are mainly wood-based panels, while the use of solid wood is rare. The artificial board is further divided into a splint, a particle board and a fiber board, wherein the fiber board has high density, medium density and low density. Plate is the main component of furniture products, its quality directly determines the quality of the product and the price of the product. MDF
Also known as fiberboard, it is a man-made board made of wood fiber or other plant fiber, using urea-formaldehyde resin or other suitable adhesive. According to their density, they are divided into high density board, medium density board and low density board. Due to its soft and impact resistance, MDF is also easy to reprocess. However, since the national standards for high-density boards are several times lower than international standards, the quality of MDF used in China needs to be improved.
Plywood is commonly known as a thin core board. It is made of three or more layers of 1mm thick veneer or thin-plate adhesive. It is the most commonly used material in hand-made furniture. The splint is generally divided into three specifications (1 centimeter 1 mm) of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT.
The decorative panel panel is a decorative panel with a single-sided decorative effect, which is precisely cut into a thin veneer with a thickness of about 0.2 mm and a splint as a base material. It is a special way of splinting and has a thickness of 3mm. Decorative panels are a high-end finishing material that is currently different from blending practices.
The board is the main component of the wardrobe , and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards, and fiberboard. Among them, fiberboard has high density, medium density and low density.
The large core board is called blockboard. It is made up of two sheets of veneers bonded together in the middle. The price of the large core board is cheaper than that of the thin core board, and the vertical direction (differentiated by the core material direction) is inferior in bending strength, but the lateral bending strength is high.
Fireproof board Fireproof board is made of siliceous material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives, and decorated by autoclaved technology. It is a new type of material that is increasingly used today and is used not only for fire protection. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel. The thickness of the fireproof board is generally 0.8 mm, 1 mm and 1.2 mm.
Particleboard particleboard is a thin sheet made of wood scrap as the main raw material and added with glue and additives. According to the pressing method, it can be divided into two types: extruded particle board and flat pressed particle board.
The melamine board is a melamine impregnated paper-finished wood-based panel. It is used to put paper with different colors or textures into the melamine resin adhesive to be soaked, then dried to a certain degree of curing, and laid on the surface of particleboard, medium density fiberboard or hardboard, which is hot pressed. Decorative plates.
Sun Kee Envelopes Limited , https://www.sunkeeenvelope.com