There are many types of lamps available on the market today, but the choice of which fixtures to install at home depends on the decoration of the home. The spotlight is a typical non-main lamp, modern genre lighting fixture of unlimited scale, which can create an atmosphere for indoor lighting. Many people choose this kind of lamp at home. Let's take a look at how to install the track light pole. Orbital spotlight wiring installation method? (Recommended reading: maintenance precautions for track spotlights )
First, how to install the track light pole
1. The track spotlight installation comprises a track, a lamp holder mounted on the track, a lamp head fixed on the lamp holder, and a lamp installed in the lamp holder. Two conductive sheets are disposed on the top of the track, and a long groove-shaped groove is formed at the bottom of the track.
2. The top of the lamp holder is a top plate, and the top of the top plate is provided with two elastic terminals protruding from each other.
3. The top plate of the lamp holder is placed in the track, and the two elastic terminals of the top plate are respectively in contact with the two conductive sheets in the track. The lamp holder is directly embedded in the track so that the lamp holder can be moved laterally to adjust the position of the light projection.
Second, the track spotlight wiring installation method
1. If the ceiling is mostly gypsum board, it is difficult to fix. At this time, the aircraft can be fixed by the bulge. After fixing the slide, take the slide light and flatten the chuck of the slide base.
2. Open the package of the track and then remove the wiring cover. For the convenience of installation, a power cord is connected at the wiring.
3, the installation of the track If the roof is a wooden board, or iron keel can be directly nailed and eye-catching, you can directly install the slide, for the sake of beauty, first make a small hole in the junction box to facilitate the introduction of the power cord into the roof.
4. Align the slide groove and insert the base of the slide light into the slide. Slightly use a little force, after the seam is tight, unscrew the knob of the chuck and rotate it. After the position is fixed, slide it to the left or right to see if it is fixed.
Third, the track spotlight installation precautions
1. Pay attention to the matching of the track and the connector of the lamp. The three-circuit track is equipped with a three-circuit connector/single circuit track with a single-circuit connector. It also has a certain directionality. Pay attention to the joint of the two when installing. After a good spotlight, adjust the horizontal and vertical angles of the luminaire according to the projection target.
2. Since the track is to bear the weight of the installed lamps for a long time, pay attention to the strength and tightness of the track during installation to ensure safety and reliability. After the track is installed, the conductive head is placed near the wire at the end of the track. Install the wiring into the track connector and tighten the screws.
The above is about how to install the related content of the track light pole , I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and beautiful design through the professional designer's on-site measurement room.
>> Click here for professional designer free room design
Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.
This quality 2 layer hutch provides a large cozy place for keeping small animals, especially rabbits.
It features multiple uses: playing, exercising, training, or simply keeping your pets safely.
This hutch provides your pets with plenty of exercise space while the tight iron wire mesh helps prevent mischievous behaviors and unexpected accidents.
Meanwhile, the construction of iron wire grid ensures your monitoring of the pets and enables your pets to keep an eye on the surroundings and get enough fresh air.
The hutch is built with a high-quality wood frame, making it a strong and safe enclosure that lasts for years. Its red roof keeps rain away while the cozy cubby makes the perfect sleeping area.
An easy-climb ladder leads from the lower ground level to the upper floor. A pull-out tray makes cleaning easy. And the doors close easily and lock with slide-bolt latches.
This spacious wooden rabbit cage is perfect for small pets.
Wooden Animal House,Wood Chicken Coop,Chicken Coop House,Wooden Hen House
HANGZHOU JIEYUN IMP & EXP CO., LTD , https://www.jaalex-garden.com