1. Place the centrifuge on a flat table or table, visually balance it, shake the centrifuge lightly by hand, and check whether the centrifuge is balanced.
2. Open the door cover, put the centrifuge tube into the rotor, the centrifuge tube must be placed in even symmetry (the centrifuge tube test solution is visually even), pay attention to tighten the nut on the rotor body, and re-check the above steps. Rotate the rotor body lightly by hand to make the centrifuge tube rack operate flexibly.
3. Close the door cover, make sure that the door cover is locked, and then check whether the door cover is closed tightly by hand.
4. Plug in the power socket and press the power switch (the power switch is on the back of the centrifuge, above the power base).
5. Set the rotor number, speed and time:
In the stop state, the user can set the rotor, speed, and time, and press the SET button. At this time, the centrifuge is in the setting state, the stop light is on, and the running light is flashing; in the run state, the user can only set the speed, time , Press the SET button, the centrifuge is in the setting state at this time, the running light is on and the stop light is blinking (press the "SET" key in the stop state to cycle through the time, speed and rotor number; press the "SET" in the running state The key can only be selected cyclically in the speed and time).
(1), set the rotor number: press the "SET" key, when the decimal in the lower right corner of the rotor digital tube is lit, enter the rotor number setting, then press the "â–²" or "â–¼" key to select the centrifuge with this work Rotor number (a total of four rotor numbers are available).
(2), set the speed: press the "SET" key, when the decimal point in the lower right corner of the last digital tube of the speed is lit, it enters the speed setting, and then press the "â–²" or "â–¼" key to determine the speed of the centrifuge this time ( The maximum speed is 5000r / min).
(3) Set the time: Press the "SET" key, when the decimal point in the lower right corner of the last nixie tube lights up, enter the time setting, and then press the "â–²" or "â–¼" key to determine the centrifuge's working time ( The longest time is 99 minutes), the time is countdown.
(4) When the above three steps are completed, press the "ENTER" key again to confirm the rotor, speed, and time set above, and then press the "START" key to start the centrifuge.
(5) During operation, if you want to see the centrifugal force, press the "RCF" key (RCF light is on), the centrifugal force at the current speed will be displayed, and it will automatically return to the operating state after 3 seconds; enter the setting state when the centrifuge is running If you want to cancel the setting, press the "RCF" key to return to the running state.
6. When the centrifuge time countdown reaches "0", the centrifuge will automatically stop. When the speed is equal to 0 r / min, the buzzer will beep 15 times. Press the "RCF" key to cancel the beep; press "STOP" during operation Press the key to stop the centrifuge and the buzzer will not sound.
7. When the rotor stops, open the door and take out the centrifuge tube.
8. Turn off the power switch, and the centrifuge is powered off.
Outdoor Swing Set
Outdoor Swing
Set using rattan hand weaving one by one and aluminum rush resistant frame,
with stronger steel support with rust-proof outdoor powder-coated.
Outdoor Swing Set make your garden more beautiful . Rattan fibers are smoothly double woven around concealed
powder-coated aluminum frames. Gently angled backs and
wide arms encourage restful lounging. The industry`s best high-performing
fabrics encase the thick, double-wrapped foam cushions.
·
Traditional forms with a spacious, inviting scale
·
Handwoven premium resin wicker UV resistant
·
Rust-resistant powder-coated frames
·
Cushions included with 30 density sofa foam
·
Versatile tempered glass tables
·
Cushions also available with 100%
waterproof fabric.
Outdoor
sofa Furniture contain sectional sofa, deep seating sofa, round or semi-round
sofa furniture, and garden set.
If
you have any questions, please contact with us directly. Outdoor Sofa Furniture
are produced
by
Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome
you can visit our Factory.For any inquiry,Please send mail directly to us.
Outdoor Swing Set,Wicker Outdoor Swing Set,Patio Outdoor Swing Set,Garden Outdoor Swing Set
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gebarset.com