Have you been waiting for the perfect moment to order a brand new floating fireplace mantel for above your fireplace or insert? Well, we aren't going to tell you what to do, but if you're here... it might be time! Or, if you already have one in hand and are ready to install it, we've got you covered too.
In this post, we’ll walk you through how to install one of our stunning Glenn Floating Fireplace Mantels. If you have a similar heavy-duty mantel from another brand, that’s okay too (though we might be just a little sad). Let's get started and make that mantel look amazing!
*How to Install a Floating Fireplace Mantel (20 minute read)*
**Where Should I Install My Floating Mantel?**
*Where should you install your Floating Mantel? Over the fireplace, silly!*
Traditionally, a mantel is placed about 6 inches above the fireplace, centered evenly. You can put yours wherever you want, as long as it doesn’t catch fire—don’t let anyone tell you otherwise.
**What Do I Need to Install a Floating Mantel?**
*Glenn Heavy-Duty Floating Fireplace Mantel Bracket by Shelfology*
For this project, you'll definitely need a stud finder if your fireplace is an insert surrounded by cement board (or a similar material). Also, drywall anchors will come in handy.
If you’re working with a full masonry fireplace, make sure you have masonry tools (bits and proper screws). You'll also need a drill with the bits your mantel kit requires (for Glenn, you’ll need both a ¼†and 3/16†drill bit). If you want everything to sit flush with the wall, a ¾†countersink bit is essential.
We also recommend using a level to ensure everything is straight. A tape measure and pencil can also be very useful during the installation process.
**How to Install a Floating Mantel:**
*Ultra-Modern Living Room featuring Glenn Floating Bracket*
While following these steps, keep in mind that it's always possible to open up your wall and add blocking (a horizontal stud drilled into two vertical studs) if you're struggling to find sufficient studs for your install.
### 1. Attach Your Bracket on One Side & Level
Use your drill bit to create a pre-drilled hole on the first side. You can pencil out a rough outline before doing this to guide you and keep things centered. Once the bracket is attached on one side, lift up the other side and use your level to get the bracket perfectly leveled. You can pencil in where you need to pre-drill. Don’t attach the whole bracket to the wall just yet.
### 2. Add Additional Anchor Points With Drywall Anchors
If you’re drilling into masonry, you can skip this step and just add as many anchoring points into your stone or brick as you can. The more you use, the sturdier your shelf will be.
For those installing the mantel on cement (or similar) board, add drywall anchors wherever you cannot hit a stud. Keeping your bracket level, pencil in where you’ll need anchors, then remove the bracket and add them where they need to go.
### 3. Install and Go!
All of the preparation has now been done! Go ahead and slap your bracket up and drill it in! Lastly, slide on your *juicy* shelf slab and step back to enjoy (and decorate) your handiwork. Good job, dude!
**Selecting the Perfect Shelf for Your Mantel**
*Glenn Floating Bracket + Ellie Magnetic Bookends*
At Shelfology, we're partial to shelves that don’t just disintegrate and warp after a year or less. We love those hard-working, drool-worthy shelf slabs that *deserve to be up on your wall*. You can browse our selection of Glenn Floating Fireplace Mantels without sacrificing the all-important quality factor. All of our shelf kits come with an all-steel wall bracket that *never gives up*. We know you’ll be impressed.
---
**Related Radness**
- [What Is a Floating Fireplace Mantel & Why Do You Need One?](#)
- [Floating Shelf Depth Guide: How Depth Impacts Stability](#)
- [How to Install a Floating Mantel Series. Part One: Mounting Over Sheetrock](#)
---
**Author: Tony Jefferson**
Content Wizard + Proponent of the Oxford Comma
Tony is a self-styled maverick who shuns shoes, cold weather, and badly done grammars. When not crafting ambitious PPC campaigns & compelling content, he can be found soaking up sun and frijoles south of the border. ¡Viva Shelfology!
---
**Share This Article**
[Facebook](#) | [Email](#) | [Twitter](#) | [LinkedIn](#)
---
**Scuttlebutt!**
- [How to Build DIY Kitchen Floating Shelves](#)
- [The Kitchen Edit: Decluttering & Designing for a Space You Love](#)
- [The Power of Personalization: How Custom Shelving Can Improve Your Life and Work](#)
- [Bring Fall Vibes Indoors: 5 Rooms Ready for a Seasonal Refresh](#)
- [Take Empty Corners from Awkward to Awesome](#)
---
**Shelftastic!**
*Explore our latest promotions and featured products.*
---
**Another really cool SVG**
Folder is specially used to hold the whole page of documents, the main purpose is to better save files, make it neat and regular.Split page folders are easy to categorize by user.The cover has a clear classification of entries, according to which users can quickly find the corresponding data.Generally separated folders with elastic rope closure, more convenient
File Package,File Folders,Storage Package,Frosted Multi Layer File Package
shaoxing chaofeng stationery manufacturing CO.,LTD. , https://www.chaofengstationery.com