The photoplotter plays an important role in the filming process in the printing process, but in many cases, due to improper operation, white film appears in the process of drawing the film. What is the main reason for this? Xiaobian is aiming at this, giving Here are some suggestions:
(1) No laser:
1 The lighter 氦氖 laser generator is damaged, check if the 氦氖 laser generator is broken due to vibration;
2 Photoplotter 氦氖The laser generator starts the high voltage circuit damage. If it can be confirmed that the 氦氖 laser generator is good, it is basically the startup circuit damage caused by no laser;
(2) There is a laser without light path:
1 photopig machine 氦氖 laser generator is installed in the black barrel, the beam is not aligned with the center hole;
245° angle deviation;
3 sound and light modulator damage (very unlikely)
4 Photoplotter sound and light modulator drive circuit is damaged. Connected to the acousto-optic modulator is a high-frequency drive circuit that is connected by a driver chip on the motherboard. If the driver chip is damaged, there will be no signal to the high-frequency drive circuit, and the acousto-optic modulator will have no high-frequency signal, which will result in no light path separation; generally feel it by hand, whether the chip has heat or not, if any, prove The chip may be damaged and needs to be replaced;
5 Photographer shutter damage, when the film is drawn, the shutter can not be opened, it blocks the light caused by white film;
6 The shutter drive circuit is damaged, the shutter itself is good, but the drive circuit is damaged, and the shutter cannot be opened;
7 The focusing mirror of the photoplotter is blocked. When there is a foreign object blocking the focusing mirror, the light cannot pass.
Article source address: http://
Bar Stool Chair,High Quality Bar Stool Chair,Bar Stool Chair Details, CN
Queen Furniture Co., Ltd. , https://www.queenfurnitures.com