Gainsborough Engineering's range of vertical form-fill-seal machines is based on a modular design. The size of the machine frame is determined by the size of the bag and further specifications provided by the user (including the type of drive, pneumatic tire, program logic controller, electronic components, The interface type, bag style, and sealing method etc.) are jointly determined.
Gainsborough Engineering pointed out: "The advantage of modular bag packaging equipment is not only that the user can specify the initial specification of the equipment in detail, but also the most attractive to the customer is that it can increase the flexibility of the equipment and replace the components of the machine at any time. , such as inflatable equipment, back-sealing systems, handling handles, and printing components."
The module of the device can be connected like a screw to the unit and is pre-installed on the packaging machine. Of course, the user can also install it himself so that a lower-cost bag packaging system can be purchased, and additional modules can be added to the device as needed. Upgrade.
Gainsborough Engineering explained that the conversion time of the machine has been significantly reduced through the combination of simple component cleaning and toolless conversion components. Changes to the settings can all be made by touching the screen to change the corresponding parameters. When the product code is set, there is a self-service menu on the screen. If potential conflict data is entered, the screen will also warn the operator.
Orient IRIS-F is a new green printing plate which is suitble for thermal CTP setters.The plates deliver the print capabilities and productivity of mainstream plates,without the processing and chemistry.So you can reduce the cost and environmental impact and be more competitive at the same time.Processless Plate is a good product,too.It is kind of green and special printing plate suitable for thermal CTP platesetters. There is no need of any processing steps before mounting exposed plates on press. And it also can be put on press after water wash.
Characteristics:
1.Negative non-ablation photosensitive system
2.Compatible with the dominant devices in the market
3.Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter
4.Good dot reproduction, stable performance, wide processing latitude
5.Long stability of latent image, can be stored at least a week after plate-making
6.High quality aluminum substrate, professional coating formulation
Negative Processless Plate,Processless Negative Thermal Plate,Processless Negative CTP Plate,Offset Plate,Negative Plate,Presensitized Plate,Processless Plate
Jiangsu Orient Printing Equipment Co.,Ltd , http://www.eastplate-iris.com