Panel furniture refers to disassembled modular furniture with wood-based panels as the main substrate and panel as the basic structure. Common artificial boards include plywood, blockboard, particle board, and MDF.
Plywood (plywood) is often used to make furniture that needs to be bent and deformed; the performance of blockboard is sometimes affected by the core material; particle board (also known as particle board, bagasse board) is loose and used for medium and high-grade furniture.
The most cost-effective, most commonly used is medium density fiberboard (MDF). The common finishing materials for panel furniture are thin wood (commonly known as veneer), wood grain paper (commonly known as sticker), PVC rubber sheet, polyester paint surface (commonly known as baking paint). The latter three finishes are typically used for mid- to low-end furniture, while natural veneer finishes are used for high-end products. Panel furniture is made of medium density fiberboard or particleboard for surface veneering. A large part of this type of furniture is wood grain simulation furniture. The veneer of some panel furniture sold on the market is more and more realistic, the gloss and feel are good, and the products with fine craftsmanship are also very expensive.
The panel home has three advantages:
First: the effective use of trees
Second: the production cycle is fast
The third is environmental protection.
The production process of the sheet is:
1. Cutting down fresh logs; 2. Peeling the bark to remove the core; 3. Drilling and pulverizing into fibers; 4, 200-degree high-temperature disinfection and sterilization, drying to 25% moisture; 5. Adding environmentally friendly resin catalyst (including Formaldehyde); 6, paving; 7, 400 tons of high pressure 200 degrees high temperature pressure; 8, plate windmill cooling; 9, double-sided killing; 10, sheet anti-deformation health. The production process of the layout furniture is: 1. computer cutting; 2, mechanical edge sealing; 3, high speed drilling; 4, mechanical forming; 5, quality inspection; 6, mechanical sanding; 7, repairing putty; Solid bottom; 9, manual sanding; 10, quality inspection; 11, spray primer; 12, repeated grinding; 13, spray topcoat; 14, dust dry; 15, quality inspection; 16, three-layer packaging; The whole process is scientific and rigorous and fully in line with international standards.
Under normal circumstances, the quality of high-quality panel furniture is higher than that of Solid Wood Furniture. In particular, some powerful manufacturers in Guangdong have chosen a medium-density board called a wood nano-layer board, which adopts international leading when forming sheet metal. The high-temperature pressure-pressing technology utilizes the nano-physical properties of wood fiber under high temperature and high pressure to form an instant, avoiding the use of resin glue catalyst (including formaldehyde), making the environmental protection grade and physical properties of the board more comprehensive than solid wood furniture (including hardwood and Cork) has opened up a broad road for the famous international market for panel furniture.
Affected by traditional concepts, it is difficult for the average consumer to understand why high-quality layout furniture is more environmentally friendly than solid wood furniture. It is also unclear what kind of layout furniture is environmentally friendly, and what kind of layout furniture is not environmentally friendly. In this case, it is best to choose a brand image with a good brand image and a full range of certificates. Of course, the environmentally-friendly panel furniture will have a little taste when it is first used. This will not affect your health. Eliminated within 3 months. If someone brags that their MDF furniture is made of high-density boards, you should not believe that because the physical properties of high-density boards are not suitable for furniture, they are only suitable for wooden floors.
Particleboard furniture:
In fact, the quality of the high quality particleboard furniture is also very high, and some are even higher than some solid wood furniture, but because of the high price of good particleboard, it is easy to burst in the furniture production process, can not smash the lines on the surface of the board, carved Patterns, so this material has been used less and less in the use of Bedroom Furniture, but the use of office furniture is still extensive. The environmental protection grade of particleboard furniture is common with MDF and solid wood. The processing technology is to first make the wood into pellets, then add glue (including formaldehyde) to stir, and then mold at high temperature and high pressure.
We now know that solid wood furniture, MDF furniture, and particleboard furniture are made of wood. Formaldehyde, benzene, and toluene are the main pollution indicators of furniture, and are strictly monitored by the state. The formaldehyde of MDF furniture is produced by catalyst. The formaldehyde of particleboard furniture is produced by glue. The formaldehyde of solid wood furniture (including hardwood, softwood and plywood) is produced by strong wood glue. All kinds of paints are used in furniture, including benzene and toluene. Under this circumstance, we understand that under normal circumstances, furniture is environmentally friendly and harmless to the human body. Hardwood furniture, Nordic cork furniture and MDF furniture are the most environmentally friendly.
Plywood Pallet,2Mm Plywood,Linyi Plywood,Packing Plywood Sheet
Hangzhou Taihua Home Furnishing Technology Co.,Ltd , https://www.taihuafurniture.com