Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand light incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable
Digital display shaking incubator 1. Accurate use and attention to the maintenance of the instrument, so that it is in a good working state, which can extend the service life of the instrument. 2. During the continuous working period of the instrument, periodic inspections should be done every three months; check the fuses, control components and fastening screws, and whether there are water drops, dirt, etc. falling on the motor and control components. 3. The bearings of the transmission part have been filled with a proper amount of grease (No. 1 calcium-naki) before leaving the factory. The instrument should be filled with grease every six months during the continuous working period. / 3. 4. The instrument is used regularly, and natural wear is normal. After the instrument is used for one year, if abnormal noise is found in the motor and compressor; the bearing of the transmission part is worn, the belt is loose or cracked, and the failure of the electronic control component is found by the manufacturer. 5. The compressor should avoid continuous starting.
Digital display light incubator 1. The shell of the incubator should be reliably grounded. 2. The incubator should be placed in a cool, dry, well-ventilated place away from heat sources and sunlight. Place it steadily to prevent vibration and noise. 3. To ensure effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm, the side of the box should have a gap of 50mm, and the top of the box should have at least 300mm of space. 4. During transportation, repair and maintenance of the incubator, avoid collision, shaking and vibration, and the maximum inclination is less than 45 degrees. 5. The instrument suddenly does not work, please check whether the fuse tube (behind the box) is burnt out, and check the power supply. 6. When cooling the incubator, it is not advisable to make the difference between the temperature in the chamber and the ambient temperature greater than 25 degrees. 7. Illumination time can be programmed and controlled by the "programmable time controller. Please refer to the instruction manual of the programmable time controller for programming method.
The employees of the company always pursue the enterprise spirit of "unity, truth-seeking and innovation". With the tenet of "customer first, quality first, reputation first", we sincerely welcome new and old customers to visit us for common development and create brilliant!
We manufacture with premium fresh new PE which is more eco-friendly with no smell and doing no harm to children's health.Easy and quick to install, Resistant to rain and frost,UV against guarantee UV for outdoor use.Nature green appearance, thick for privacy.Does not require any maintenance,Can be installed anywhere with existing support.
Green Grass Wall,Artificial Plant Wall,Grass Wall,Artificial Green Wall
Shandong Shangkun Sports Health Technology Co.,Ltd. , http://www.shangkunsports.com