The constant temperature and humidity test chamber produced by Ai Siwei Co., Ltd. is based on the principle of customer satisfaction, with the aim of high quality and durability, and accumulated rich experience in manufacturing and manufacturing. All kinds of products have passed strict quality inspection before leaving the factory. The following is the introduction of the effect of opening the test door to the test product during the high temperature and high humidity test in the constant temperature and humidity test chamber.
1. When using the constant temperature and humidity test chamber, be sure to close the door and close it, otherwise it will be exposed to temperature and humidity and will not reach the performance area.
2. If the machine is running below 0 degrees, try to avoid opening the door, because when the temperature is low, if the door is opened, it will cause the internal evaporator and other parts to freeze. Especially the lower the temperature, the more serious the situation. If you must open it, you should try to shorten the time.
3. Constant temperature and humidity test chamber When the low temperature operation is completed, be sure to set the temperature condition to 60 degrees and dry it for about half an hour before opening the door so as not to affect the test time of the next working condition or the icing phenomenon of the evaporator or the test object. damage.
4. During the operation, do not open the door as much as possible. Especially in the high temperature test, it is not the two-way door in advance, and it is absolutely impossible to open the door. Because high temperature moisture rushes out of the box, it is very dangerous and can cause personal injury.
5. The high temperature air rushed out from the constant temperature and humidity test chamber may trigger a fire, resulting in loss of personnel and property. Therefore, we must strictly follow the instructions for use.
Welding tongs, dipping tongs, industrial tongs
Henan Probon Tools CO.,LTD , https://www.tapemeasuretools.com