[ Chinese wardrobe net ] Due to various reasons, the tension of contemporary housing, many small-sized houses are more liked by the people nowadays. The shrinking of the housing area has also led to the popularity of some small spaces and small furniture. Need to make good use of every inch of space, more reasonable design for better decoration.
Nowadays, people often use the wardrobe style as a four-door wardrobe. The four-door wardrobe, as the name suggests, is a four-door wardrobe. It has a small footprint and generally has a large storage space and can store a lot of clothes. Reasonable use of the space of the wardrobe can add a lot to the entire house. As one of the must-have furniture for the wardrobe, choosing a suitable wardrobe is very important.
The above picture shows the simple assembly drawing of the four-door wardrobe. As can be seen from the figure, the installation of the wardrobe is mainly divided into three main parts: the main layer, the low-end drawer assembly and the door hardware. The low-end drawer The installation of components is one of the most complicated tasks between the three, and care must be taken during the installation to avoid damage to the accessories. In the installation of the drawer, the choice of the slide rail is the key, and the installation process must ensure the level of the slot line. Finally, the installation order from top to bottom is a relatively correct method. Next, Xiaobian will systematically introduce the installation method of the four-door wardrobe.
After receiving the parts of the manufacturer's series of wardrobes, separate the different parts and start the installation of the wardrobe.
Step 1: Give the bottom plate and the foot strip a three-in-one connector. When installing the three-in-one connector, the direction of the notch of the screw of the three-in-one connector must be upward, and then fixed with a tool. If the direction is wrong, the screw will not be fixed.
Step 2: Lock the short leg to the wardrobe foot.
Step 3: Lock the bottom plate with the foot bar. After aligning the hole position, tighten the screw.
Step 4: Put the moisture-proof nail on the bottom of the base, and the bottom plate is completed.
Step 5: Give the bottom plate and the partition a three-in-one connector.
Step 6: Fix the back plate and the middle back plate.
Step 7: Connect the side panels and the back panel to form a combined body.
Step 8: Install the combination of the side panel and the back panel.
Step 9: Install the back plate with venting holes.
Step 10: Lock the carrier between the side panel and the partition.
Step 11: Make a pants rack. First, put on the slide rail body and lock it, then install the partition plate on the slide rail body and lock it. After locking the connector on the pants rack, align the panel and install the rail strip, and finally fit the three-section guide rail to the pants rack. Gently push in.
Step 12: Make a storage drawer. First fix the two rail strips on the side panel, put them into the closet, then make another drawer, fit the rails, push the drawer gently, then adjust the drawer, debug the moving part, and remove the unsmooth part. The screws are displaced and reloaded.
Step 13: Install the top plate.
Step 14: Attach the door hinge to the door panel and lock it on the side panel and the partition. It should be noted that the outside of the closet is a large door hinge, and the inside is a small door hinge. After the completion, debugging adjustment is still needed.
Step 15: Fix the backplane.
Step 16: Put on the ventilation cover, which means that the installation of the wardrobe has been completed.
For the installation of the wardrobe, as long as there is a simple manual, coupled with the required tools and certain helpers, can be assembled, and the difficulty is not very high, but Xiaobian believes that for more complex wardrobes, it is best to please Professional personnel are assembled.
The disassembly of the wardrobe is much simpler than the assembly. As long as the tools are prepared, such as the electric drill, there is a word, from the inside to the outside, from top to bottom, the screws are removed and removed one by one. Just fine.
Finally, Xiaobian friendship reminds that those who have strong hands-on ability should not have nothing to do with the wardrobe at home. If you don’t come back, you will be smashing the board...
Zipper Pouch,Zip Pouch Bag,Custom Zipper Bags,Plastic Zipper Pouch
MIFIA INDUSTRIAL CO., LTD., , https://www.stationery-manufacturer.com