[Chinese wardrobe network] [difficulties] The weather is changeable, the air is humid, I believe that many people in the wardrobe have the phenomenon of moisture and mildew. Once the wardrobe is moldy, the service life will be greatly shortened. How to avoid this happening? What?
[Question] How to avoid the moisture in the wardrobe?
ã€Best answer】
When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth. Should prevent heavy objects and sharp objects from hitting the track, scratch the cabinet and door panels, the cabinet body seals should not touch water and other liquid solvents to prevent the edges from falling off. Let it be breathable, or use dehumidifying agents regularly to avoid moisture and bacteria in the cabinet and clothing. Use less chemical-containing fragrances to deodorize the wardrobe because they are likely to cause damage to the wardrobe. Wooden wardrobes can be wiped with a clean rag. If it is dirty, use soapy water or a neutral detergent and wipe with a damp cloth. It is normal for the light rail door pulley to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2-3 months. When the air in the living room or the weather is too humid, please open the doors and windows regularly and put a small bag of dry lime or other desiccant in the corner of the closet to prevent mold and deformation of the cabinet and door panel. Do not place the closet in direct sunlight to prevent the wood from deforming or brittle under the light. When purchasing, choosing drawers and furniture with high cabinet tightness is the best strategy to reduce dust. Long-term use of sliding doors, dust-proof strips may have a slight degumming phenomenon, which can be glued with double-sided tape; the lower track locator can be positioned with gaps, and a flat-blade screwdriver can be used to align the positioner to the side of the side plate and push it to the tight seam. Yes; the sliding door is tilted, and when it is tilted to the right, the left bottom wheel is “loose†or the right bottom wheel is “tightâ€. When using the sliding door, be sure to check if the handle is convex. If there is a protrusion, press it first, otherwise it will hit the frame or handle.
Thermoplastic Rubber Feet with Steel/Metal Support Bushing, also known as Rubber Bumpers Feet&Foot and Rubber Stopper Pad&Silicone Padded Forefoot, which is made of rubber +metal or steel material with screw or revets and produced by compression molding and die-cutting tool. Thermoplastic Rubber Feet with Steel/Metal Support Bushing, also known as Rubber Bumpers Feet&Foot and Rubber Stopper Pad&Silicone Padded Forefoot, which is made of rubber +metal or steel material with screw or revets and produced by compression molding and die-cutting tool.
Rubber Feet,Adhesive Rubber Feet ,Rubber Silicone Feet,Non-Standard Rubber Bumpe
Xiamen The Answers Trade Co.,Ltd. , https://www.answerssilicone.com