Uses: Microcomputer automatic control, touch switch, easy to operate; programmable multi-segment control mode, temperature, humidity, illuminance and time can be set separately during day and night. Air duct ventilation, studio wind speed is gentle, temperature is uniform; hollow reflective tempered film glass, good thermal insulation performance, beautiful appearance. Fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc.
Instructions for use 1. Turn on the power, close the power switch, power on the whole machine, and the power indicator in the switch is on.
2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.
3. If you need lighting, turn on the light switch.
4. This incubator has a breakpoint protection function and a delay function of about one and a half minutes. It takes about one and a half minutes to start again after the compressor stops.
Maintenance and Maintenance 1. The incubator housing should be grounded reliably.
2. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it smoothly to prevent noise from occurring.
3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm. There should be a 50mm gap on the side of the box and at least 300mm on the top of the box.
4. When the incubator is transported, repaired and maintained, it should avoid collision, shaking and shaking; the maximum inclination is less than 45 degrees.
5. The instrument suddenly does not work. Please check whether the fuse tube (after the box) is burnt out and check the power supply.
6. When the incubator is working in refrigeration, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.
Professional manufacturing is more secure, affordable, our quality is the best, worthy of your trust, Shanghai Xinzhuang welcomes you!
It adopts electric cutting way, will be in A3, A4 typesetting good name card paper, placed in the machine entrance, set the crop size, press the switch, the machine will automatically be sent to a name card paper inside the machine, the machine according to the internal knife group of different sizes, can be cut into postcards, name card name card, card and personal card. The chekanovskogo machine has the advantages of high accuracy, cutting speed, long service time etc..
Card Slitting Machine,Card Perforating Machine,Card Creasing Machine,Manual Card Die Cutter
Anhui Innovo Bochen Machinery Manufacturing Co., Ltd. , https://www.innovomachines.com