The brand high and low temperature alternating heat and humidity test box is made of high quality materials, processed and formed by the most advanced processing equipment in the country, and the surface of the outer casing is sprayed, beautiful and smooth. The color is coordinated, the angular design, and the lines are smooth and natural. The inner tank is made of imported high-quality stainless steel plate, which is reasonable in design and durable. Under the premise of complying with national standards, the equipment is more practical and easy to control based on the stability of all aspects. Moreover, the high and low temperature alternating heat and humidity test chamber has the characteristics of easy installation, simple operation, and basically no need for daily maintenance.
1. The outer casing of the equipment is made of high-quality A3 steel plate CNC machine tool, and the surface of the outer casing is sprayed and treated, which is more smooth and beautiful; the inner liner is SUS304 high-quality stainless steel plate;
2, insulation material: high-density glass fiber cotton, insulation thickness of 100mm, so that the indoor temperature will not be transmitted to the outside of the equipment, to ensure a stable temperature in the laboratory;
3. A transparent window is set at a reasonable position for the door to observe changes in the indoor sample. The observation window adopts multi-layer hollow tempered glass and inner glued sheet type conductive film, which has the advantages of transparency, heat insulation, and difficulty in generating steam frosting;
4. The stirring system adopts long-axis fan motor and high-low temperature resistant stainless steel multi-wing impeller to achieve forced convection vertical diffusion cycle, so that the temperature and humidity in the laboratory are uniform and stable;
5. A double-layer high-temperature resistant high-strength sealing strip is used between the door and the box of the high-low temperature alternating heat and humidity test chamber to ensure the sealing of the test area. The inner door material of the door is made of stainless steel, and the door handle is made without reaction, which makes the operation easier;
6. Lead test hole (left side of the machine) can be used for external test power cable or signal cable (50mm diameter, one standard, the number of apertures and holes should be increased when ordering);
7. The refrigeration system of the equipment is installed at the bottom. The compressor is imported from Taikang, France, and the two units are combined and cooled to ensure that the temperature or humidity is reduced to the required value within the specified time;
8. The control part of the equipment is designed on the right side of the equipment. It is distributed with temperature controller and control switch. It is easy to operate, simple and easy to maintain.
9. The bottom of the machine is equipped with a high-quality fixed PU movable wheel, which can easily move the machine to the designated position and finally fix the casters;
The YASELINE brand established by Yashilin Instruments is positioned in the middle and high-end customer base. In the fierce market competition, Yashilin, which has many years of professional production and operation environment testing equipment, has its own industry leading position through technological innovation and its brand advantage is obvious.
Stuffed Teddy Bears,Stuffed Brown Bear,Beautiful Red Bear Toy,Lovely Teddy Bear Plush
Guangdong Hayidai Toys Co., LTD. , https://www.hayidaiusa.com